top of page

Load data for 7 x 44 Penna + .277 | 120gr | CutEdge MTH

Recommended Powder(s): Accurate 1680, Alliant Reloder-7, IMR 4227, Norma 200, ReloadSwiss RS 36

7 x 44 Penna + .277 | 120gr | CutEdge MTH

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.277 | 120gr | CutEdge MTH
Manufacturer SKU:
MTH H01
Bullet Weight:
120gr | 7.8g
Bullet Diameter:
0.277" | 7.04mm
Bullet Length:
1.192" | 30.3mm
Caliber:
7 x 44 Penna load data
Case Length (l3):
1.750" | 44.4mm
Cartridge Length (C.O.L.):
2.325" | 59.0mm
Seated Depth:
0.617" | 15.7mm
Shank Seated Depth:
0.410" | 10.4mm
Case Capacity:
32.7 Grains of Water | 2.12 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
63817 psi | 4400 bar
LID:
LID_B8449_C1078
Last updated:
2025-01-01
Recommended Twist Rate:
1:10 - 1:8

Load data for 64 loads in caliber 7 x 44 Penna with .277 | 120gr | CutEdge MTH bullet and 32 powders such as Accurate 1680, Alliant Reloder-7, IMR 4227, Norma 200, ReloadSwiss RS 36. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI APS 450
<<locked>>
83%
56608
89%
**65
100%
ADI AR 2205
<<locked>>
89%
55405
87%
**83
100%
ADI AR 2207
<<locked>>
96%
45165
71%
**39
100%
ADI AR 2219
<<locked>>
96%
41089
64%
**97
95%
Accurate 1680 👍
<<locked>>
93%
55941
88%
**28
99%
Accurate 2015
<<locked>>
97%
33518
53%
**62
96%
Accurate 5744
<<locked>>
87%
55579
87%
**11
100%
Accurate No. 11 FS
<<locked>>
85%
55187
86%
**56
100%
Alliant AR-Comp
<<locked>>
96%
29385
46%
**16
96%
Alliant Reloder-10x
<<locked>>
96%
36753
58%
**34
98%
Alliant Reloder-7 👍
<<locked>>
96%
47384
74%
**33
100%
Baschieri & Pellagri 106
<<locked>>
97%
42975
67%
**41
96%
[Hodgdon CFE BLK]*
<<locked>>
97%
50067
78%
**16
93%
[Hodgdon H322]*
<<locked>>
97%
35041
55%
**85
93%
[Hodgdon H335]*
<<locked>>
96%
40973
64%
**97
94%
Hodgdon H4198
<<locked>>
96%
45948
72%
**67
96%
IMR 4198
<<locked>>
95%
39972
63%
**28
99%
IMR 4227 👍
<<locked>>
95%
55521
87%
**79
100%
Lovex D060
<<locked>>
89%
55579
87%
**11
100%
Lovex D063
<<locked>>
85%
55970
88%
**95
100%
Lovex S053
<<locked>>
95%
53258
83%
**36
100%
Norma 200 👍
<<locked>>
97%
42699
67%
**20
99%
ReloadSwiss RS 36 👍
<<locked>>
97%
56579
89%
**31
100%
SNPE Vectan BA6 1/2
<<locked>>
97%
50212
79%
**69
100%
[SNPE Vectan SP 10]*
<<locked>>
97%
41713
65%
**13
94%
Shooters World Blackout
<<locked>>
85%
55970
88%
**95
100%
Shooters World Buffalo Rifle
<<locked>>
89%
55579
87%
**11
100%
[Somchem S335]*
<<locked>>
97%
30792
48%
**67
92%
Vihtavuori N110
<<locked>>
91%
55840
87%
**93
100%
Vihtavuori N120
<<locked>>
96%
41945
66%
**54
100%
Vihtavuori N130
<<locked>>
96%
35114
55%
**49
97%
[Vihtavuori N133]*
<<locked>>
97%
29733
47%
**31
93%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI APS 450
<<locked>>
81%
53882
84%
**39
100%
ADI AR 2205
<<locked>>
81%
44309
69%
**49
100%
ADI AR 2207
<<locked>>
81%
27963
44%
**37
99%
[ADI AR 2219]*
<<locked>>
86%
29979
47%
**73
91%
Accurate 1680
<<locked>>
81%
37318
58%
**56
95%
[Accurate 2015]*
<<locked>>
85%
22945
36%
**16
91%
Accurate 5744
<<locked>>
81%
46441
73%
**83
100%
Accurate No. 11 FS
<<locked>>
81%
48037
75%
**74
100%
[Alliant AR-Comp]*
<<locked>>
86%
21596
34%
**90
91%
[Alliant Reloder-10x]*
<<locked>>
81%
23047
36%
**23
92%
Alliant Reloder-7
<<locked>>
81%
29994
47%
**37
96%
[Baschieri & Pellagri 106]*
<<locked>>
82%
27528
43%
**42
90%
[Hodgdon CFE BLK]*
<<locked>>
91%
42032
66%
**95
91%
[Hodgdon H322]*
<<locked>>
91%
29414
46%
**60
90%
[Hodgdon H335]*
<<locked>>
90%
33011
52%
**46
91%
[Hodgdon H4198]*
<<locked>>
81%
29312
46%
**62
90%
IMR 4198
<<locked>>
81%
26614
42%
**49
95%
IMR 4227
<<locked>>
81%
36289
57%
**10
99%
Lovex D060
<<locked>>
81%
44454
70%
**57
99%
Lovex D063
<<locked>>
81%
48834
77%
**06
100%
Lovex S053
<<locked>>
81%
35462
56%
**90
100%
Norma 200
<<locked>>
81%
25599
40%
**91
95%
ReloadSwiss RS 36
<<locked>>
81%
34534
54%
**19
99%
SNPE Vectan BA6 1/2
<<locked>>
81%
33301
52%
**42
100%
[SNPE Vectan SP 10]*
<<locked>>
89%
32097
50%
**33
90%
Shooters World Blackout
<<locked>>
81%
48834
77%
**06
100%
Shooters World Buffalo Rifle
<<locked>>
81%
44454
70%
**57
99%
[Somchem S335]*
<<locked>>
94%
28094
44%
**05
90%
Vihtavuori N110
<<locked>>
81%
41698
65%
**29
100%
Vihtavuori N120
<<locked>>
81%
26295
41%
**65
99%
[Vihtavuori N130]*
<<locked>>
81%
22307
35%
**50
91%
[Vihtavuori N133]*
<<locked>>
90%
24961
39%
**13
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page